i-Pix Satellite Mk II
Our original product completely redesigned with the latest functionality expected for todays demanding and dynamic lighting industry. Eight 10 watt high powered RGB and daylight white light engines provide a high light output, whilst saving energy.
Building upon the success of its highly successful predecessor, the mk II Satellite is small. bright and very versatile.
With over five times the original intensity, the leds can be controlled in two square groups of four, or grouped together. It is capable of fitting within a 1' square truss for truss toning, or as a wash device.
With thousands of the mk I satellites, with a long service lifetime, we have built our reputation for reliable well designed fixtures. This is backed up with a three year warranty.
 |
 |
Key features
- three times the output of original Satellite
- RGB and daylight white (5600°K)
- homogenised optics,
- 16 bit, self contained,
- dmx or stand alone device
- battery input
- built in wireless dmx
- battery input and output
- different colours, including stainless steel and anodised silver
- quick rig mounts for omega brackets
- Can be run in two cells of RGBW, as squares cells
- Easily interlink several units to create linear forms, with square pixels
- optional beam shaping films clip onto the front
- optional yokes for linear interlinking
- British designed and built
- 3 year warranty
| Optical | |
| light source | led engin LZ4 |
| wavelengths | Red 623 nm |
| Green 525 nm | |
| Blue 460 nm | |
| White 5100°K | |
| total luminous flux | 3176 lm |
| Dimensions | |
| length | 222 mm |
| width | 142 mm |
| height | 250 mm |
| weight | 4.5 Kg / 10 lb. |
| Construction | |
| materials used | alluminium |
| paint finish | powder coated |
| Electrical | |
| input | 90 volts to 265 volts |
| power consumption | 83W RGBW full |
| connections | powercon power in |
| powercon power out | |
| 5 pin xlr dmx in | |
| 5 pin xlr dmx in | |
| 2 pole battery input | |
| Control | DMX |
| 10 operating modes 16 & 8 bit | |
| stand alone | up to 20 internal memories |
| (for single fixture only) | chase built from these memories |
| 2 second to 255 seconds wait and crossfade times | |
| Weather protection | IP20, not watertight |
| Approvals and compliance | bs en 55103-1 harmonics |
| bs ed 55103-2 immunity | |
| bs en 61000-3-2 emissions | |
| usa / canada ETL pending |
 |
Flight case packs A 6 way case with inbuilt battery charging function and ability to program whilst fixtures remain in the box. As well as the charging section, a rigging and cable management section caters for the fixtures on the deck or in the air. Designed to be a self contained system wired to local mains, sharing wireless dmx over the inbuilt mains supply or the external battery pack, which elegantly fixes to the standard fixture. Can also be hard wired to standard dmx. |
 |
Satellite battery pack Transforms the new satellite into a freestanding, focusable RGBW device, with stand alone or wireless DMX playback. Designed to run for a minimum of 9 hours with three of the four channels on full intensity. Single charger Simply plugs into the battery pack and takes an average of four hours to fully charge. Wireless dmx transmitter Omega Bracket Designed for ease of rigging the fixture from above, without the need for tools (one ships with each fixture) |
 Documents |
 |
 Drawings |
|
 Files |
 Data sheets |
||||
| User
manual |
||||
